คู่มือโปรแกรมกล่อง Votol (3)

SiAECOSYS V2 1 VOTOL EM Controller Program Manual Non-profession do not operate!SiAECOSYS V2 2 This manual was explained in detail for the IV generation EM series controller, which update download illustrates and parameter adjustment. Before using the software, please read this manual. In order to facilitate the operation, please keep this manual. In order to make the software of maximum utility, please make sure the end user to use this manual. Please be sure to read the manual carefully before starting the operation. Disclaimer: For the Ⅳ generation of EM series controller program updates and parameter adjustment can only be done by professional and technical personnel. If without the written permission of our company for the Ⅳ VOTOL generation EM series, the application update to download and parameter of the controller adjustment is not allowed. Non-profession do not operate this software. In the above event, our company will no longer be responsible for accident happens by controller.SiAECOSYS V2 3 1. Software installation (only support win 7/10) 1.1 USB Driver Installation (1) Download the “USB-to-serial-win 10-20150814” file, decompressing file. (2) choose the suitable driver with your computer for installation. win7,win8, win 10 are available. 1.11. Decompress the operation first 2. Unzip the YH-340 USB package and select CH341SER.EXE to install it. Follow the steps above to install (3) After installation, please connect the USB cable with controller and computer. If it’s unable to connect, pls Check below steps Right click“my computer” in the desktopSiAECOSYS V2 4 then click “device manager” choose “port(COM & LPT)” choose the COM with“!”, click “search automatically for updated driver softwareSiAECOSYS V2 5 Close the software when you finish After running, please run the software directly: EM_V3 series debugging program; If the port has”自 2012 已停产，请联系供货商(Pls contact supplier if it is stop production since 2012)” Methods and steps: First step: Install driver PL2303_Prolific_DriverInstaller_v110 Second step: Right click to update the driver and select Browse Computer to find the driver software.SiAECOSYS V2 6 Third step: Click to select from the list of drivers for your computer; Fourth and finally, select version 3.3.10.140 (2009-11-19), click Next, close the window when finished;SiAECOSYS V2 7 Close the window when finished. Please run “Em_V3 Series debugging program” directly after completion.SiAECOSYS V2 8 2. Controller connection 2.1 Connect controller Controller host computer simple wiring diagram Description: controller B+ connects battery B+ controller B-connects battery B-, controller electric door locks connect battery or controller B+; The USB debug line is connected to the controller debug port; 2.1.1 According to the controller with CAN or without CAN to select the appropriate USB debug line; with CAN controller need to check the CAN enable, without CAN does not need to check; EM200 controller needs to exchange the debug line CAN-H and CAN- L , otherwise can’t connect the controller;SiAECOSYS V2 9 2.1.2 Host computer selection EM50 EM100 EM150 without CAN choose EM50 EM100 EM150 with CAN choose EM200 choose EM50 EM100 EM150 EM200 model XY-03-P with CAN and without CAN can share a host computer Specific host model needs to inquire the related sales; 3 Open the computer device manager before connecting to the computer to check whether the USB port is successfully installed. Select the appropriate host computer to connect the host computer to the serial port when the controller is not powered. After selecting the corresponding serial port on the device port, click CreateFile. 2.2SiAECOSYS V2 10 Then power on (connect with e-lock), click connect (in setting 1 page), the nominal voltage should not be 0. If it’s 0, click connect again.